Bad Boy Mowers 02.9812.0001C Manuale Utente

Temp over threshold

Temperature too high

Check fans/filters

Lamp over threshold

Lamp hours above recommended 
maximum

Change lamp

Lamp Off

Fan Error: Cannot strike lamp while 
any fan is in error state

Check fan, fan cabling

Pan/Tilt Aux Encoder Error

Auxiliary encoder value is too far from 
the main encoder value

Check auxiliary encoder and cabling/
connections

Gobo out of zero range

When zeroing gobo wheels, the 
wheel is too far away from zero to set 
the position

Move wheel closer to home position 
before zero command

DMX busy: cancel crossload

Cannot execute crossload with traffic 
on DMX line

Remove incoming DMX control for 
cross load

Data not crossload format

Data in memory is not proper format 
for crossload

Load software via computer

DMX: UART transmit error

Transmit buffer busy when trying to 
send

Remove any incoming DMX, retry

Crossload Timeout

Crossload execution took too long 
due to error

Remove any incoming DMX, retry

CAN Comm Error

Stopped receiving CAN messages 
from motion processor

Check CAN cables/connections, 
motor control board

Main Fan Error

Main fan CAN messages not 
received or fan not running properly

Check fan, fan cabling

UPE Fans Error

Upper Enclosure fans not running 
properly

Check fan, fan cabling

Pinch Fan Error

Pinch fan not running properly

Check fan, fan cabling

Stack Fan Error

One or more stack fans not running 
properly

Check fan, fan cabling