Makita TD0101F Manuale Utente
Guide Field lead wires (purple, orange)
inside the rib of Holder arm to avoid
pinching between Housing set (R) and
Holder arm.
inside the rib of Holder arm to avoid
pinching between Housing set (R) and
Holder arm.
Wiring around Holder arm
W
iring diagram
P 14/ 14
110 - 127V area
Except UK
110V for UK
Rib
Put Insulated connector
into the area which is
surrounded by Ribs.
into the area which is
surrounded by Ribs.
rib
rib
Line filter
(if used)
(if used)
Pass Lead wires of Power
supply cord through Line filter
if necessary.
supply cord through Line filter
if necessary.
Wiring of Noise suppressor’s
Lead wires
Guide the Lead wires of Noise suppressor
between ribs.
* Lead wire (white) to Switch
* Lead wire (black) to LED circuit
between ribs.
* Lead wire (white) to Switch
* Lead wire (black) to LED circuit
Holder arm
rib of
Holder arm
Holder arm
Wiring of Field
lead wires
Fix Field lead wire (red) with
Lead wire holders on Switch.
Lead wire holders on Switch.
rib
Field lead
wire (white)
wire (white)
Lead wire
holder on
Switch
holder on
Switch
Lead wire (orange)
of left Brush holder
of left Brush holder
Wiring of Lead wire (orange)
of left Brush holder and
Field lead wire (white)
Route Lead wire (orange)
of left brush holder by ribs.
of left brush holder by ribs.
Fix field Lead wire (white)
with Lead wire holder and Ribs.
with Lead wire holder and Ribs.
Noise suppressor
Terminal block
TD0101F
Fig. D-6
Wiring of Lead wire (brown or
black) of Power supply cord
black) of Power supply cord
Through the route between the following
ribs, guide the above lead wire to Switch.
* ribs for setting Noise suppressor
* ribs for setting Terminal block
ribs, guide the above lead wire to Switch.
* ribs for setting Noise suppressor
* ribs for setting Terminal block
Noise suppressor is not
used for some countries.
used for some countries.