Frigidaire 4400 Series Manuale Utente

3

Note: Cycle times are approximate and will vary 

with options selected. Hot water is necessary to 

activate dishwasher detergent and melt fatty food 

soils. An automatic sensor will check the incoming 

water temperature and, if it is not hot enough, the 

timer will be delayed for automatic water heating 

in the main wash of all cycles. This happens even 

when Hi-Temp option has not been selected. When 

Hi-Temp is selected, an even higher temperature 

will be guaranteed to handle heavier soil loads.

1.  Load dishwasher (See Preparing and Loading 

Dishes).

2.  Add detergent (See Dishwasher Dispenser &  

Detergents).

 3.  Add rinse aid, if needed (See Rinse Aid).

4.   Select desired Cycle (See Cycle Chart). The 

indicator light above the pad will glow when 

selected.

5.  Select desired Options (See Options). The 

indicator light above the pad will glow when 

selected.

6.   Close door to latch.

7.  Run hot water faucet nearest dishwasher until 

water is hot. Turn water off.

8.  To start, press Start/Cancel pad.
Note: The dishwasher is programmed to