AEG F89078VI-M Manuale Utente
16
Rev 0.0
INSTALLATION INSTRUCTIONS
EN
Fig. 5-03
A
5.2 Connections
Install the dishwasher so as to allow ease of access to the electrical and hydraulic
connections through the adjacent unit. These connections must never be behind
the dishwasher.
The inlet and drain hoses can be pointed in all directions. make sure that they are
not bent, crushed or too tight. Tighten the ring nut after pointing the hoses in the
required direction.
Figure 5-04 indicates the distances to maintain between the dishwasher and the
various connections.
connections through the adjacent unit. These connections must never be behind
the dishwasher.
The inlet and drain hoses can be pointed in all directions. make sure that they are
not bent, crushed or too tight. Tighten the ring nut after pointing the hoses in the
required direction.
Figure 5-04 indicates the distances to maintain between the dishwasher and the
various connections.
FIRE HAZARD!
DO NOT COVER OR CRUSH THE CORD PLUG.
DO NOT COVER OR CRUSH THE CORD PLUG.
A = 1200 mm / 47”
B = 1500 mm / 59”
C = 1600 mm / 63”
D = min. 400 mm / 16”
B = 1500 mm / 59”
C = 1600 mm / 63”
D = min. 400 mm / 16”
A
B
D
C
Fig. 5-04