Mr. Coffee BMH Manuale Utente

Your new Mr. Coffee Burr Mill has the following features: 
•  Whole Bean Hopper - Removable and easy to clean bean hopper holds up to a ½ lb. of 

coffee beans at a time.

•  18 Custom Grind Selections - Choose from 18 different grind selections from fine 

(espresso grade) to course (French Press grade) for your customized brewing method.

•  Start/Stop Button & Cup Selection Dial - Perfect portions every time with automatic 

grind settings from 2-18 cups.

•  Automatic Shut-Off - Eliminates the guesswork by automatically stopping at the desired 

portion chosen.

•  Removable Ground Coffee Chamber - Lets you easily transfer ground coffee.
•  Stainless Steel Design - A stylish accessory for your kitchen.
•  On/Off Indicator Light - LED illuminates letting you know your Burr Mill is ready for use.
•  Cord Storage - Safely stores excess cord to keep your countertop neat.

•  Built-In Scoop/Brush - Makes clean up easy.

GETTING STARTED

Always clean your Burr Mill before using the first time. 
Make sure that your 1st cup of coffee is as good as can be by cleaning your Mr. Coffee Burr 
Mill before its first use. Just follow these simple steps:
1.   Wash the bean hopper and grinding chamber parts with warm soapy water. (Never 

use abrasive cleansers, steel wool pads or other abrasive materials. UNIT IS NOT 
DISHWASHER SAFE).

CAUTION! Never immerse the Burr Mill itself in water, in any other liquid or place  
in the dishwasher.

2.  Dry all pieces thoroughly.
3.   Install the Bean Hopper onto the unit and turn clockwise (several rotations-will hear 

clicking as unit gets tighter) until it stops with the grind size indicator on Fine (Figure 1).

4.   Please chamber lid back on grinder chamber and then install into unit, tightly locking 

into place.

NOTE:  If all Bean Hopper and Grinding 

Chamber parts are not tightly in place 
correctly, the safety switches within 
the machine will not allow the grinder 
to work. You MUST have all parts in 
place to safely use the Burr Mill.

Brand: Mr. Coffee

Model: Burr Mill Grinder

Description: ID Spec/ Master Art

Page: 3 of 6 

- To Scale 1:1

- Use CorelDRAW files for reproduction.

1.   After all parts have been put into place,  

fill the Bean Hopper with coffee beans  
and replace the lid.

2.   Adjust the grind size by rotating the hopper 

counterclockwise and then aligning the 
indicator on the hopper to your desired 
grind size (Figure 2).

NOTE:  Grind size setting will change the output 

volume of grounds. Fine will produce 
less grounds and course will product 
more grounds when the same volume 
(cup) setting is used.

3.   Set the Cup Selection Dial to the desired 

amount of grounds (Figure 3).

4.   Press and hold briefly the Start/Stop button to 

start the grinding process.

5.   The unit will automatically stop when the 

selected volume has been reached.

NOTE:  You may also stop the grinding process 

at anytime by pressing the Start/Stop 
button again.

6.   Remove the coffee chamber and lid and use 

the grounds as needed.

7.   Cleaning brush can be used to remove dust 

from grind chamber chute located behind 
the removable grinding chamber (Figure 4).

Brand: Mr. Coffee

Model: Burr Mill Grinder

Description: ID Spec/ Master Art

Page: 3 of 6 

- To Scale 1:1

- Use CorelDRAW files for reproduction.