Smeg PVA750NL Manuale Utente

 

 

 

 

The operations described below must be carried out with the appliance not 
built-in and not connected to the gas or electricity supply. 

The appliance is tested with G20 (2H) natural gas at the pressure of 20 mbar.  
If it is to be used with other types of gas, the burner nozzles have to be changed 
and the primary air flow adjusted. 
To replace the nozzles and adjust the burners, the hob skin has to be removed. 
Proceed as described below. 
 

Remove all the burner components in the numerical order shown below: 
 

 

•  Pull off all the knobs. 

 

•  Lift all the burner 

components off the hob. 

 

 
 

•  Remove the cover plate 

of each burner by 
undoing the screws. 

 

 
 

•  Remove the hob skin 

fixing screws, taking care 
only to remove the 
screws shown on the 
right. 

 

 
3

 
 

•  After removing all the 

components described 
above, lift off the hob 
skin.  

 
4