Smeg NCT685BHK Manuale Utente

 

14

 

  

 Having carried out the above adjustments, reassemble the appliance 

following, backwards, the instructions in paragraph “5.1 Removing the 
hob”. 

 

   

 Replace the components on the burner and slide

the knobs on the gas tap pins. Light the burner
and set it at turndown rate position. Remove the
knob and turn the regulation screw inside or next
to the gas tap pin (depending on the model) until
you get a suitable low flame. Replace the knob
and check burner flame stability: (rapidly turning
the knob from maximum to minimum position,
the flame should not go out). 

 

   

 To regulate the turndown ratefor LPG, completely tighten (clockwise) 

the screw inside or next to the gas tap pin (depending on the model). 
The diameters of the by-passes for each burner are given in table “5.2 
Nozzle replacement and primary air adjustment”. 

 

  After having regulated the device with a gas other than the one tested,