John Lewis JLBIGH753 Manuale Utente

15

Dimensions are given in mm.

Building over a kitchen unit

Building over a kitchen unit

Building over a kitchen unit

Building over a kitchen unit

Building over a kitchen unit

with door

with door

with door

with door

with door

Proper arrangements must be taken in
designing the furniture unit, in order to avoid
any contact with the bottom of the hob which
can be heated when it is operated. The
recommended solution is shown in diagram
3.

The panel fitted under the hob  ("a") should
be easily removable to allow easy access if
technical assistance is needed. The space
behind the kitchen unit ("b") can be used for
connections.

Fitting the Hob into the

Fitting the Hob into the

Fitting the Hob into the

Fitting the Hob into the

Fitting the Hob into the

W

W

W

W

Worktop

orktop

orktop

orktop

orktop

Carry out the building in of the hob as
follows:

1. place the seals supplied with the hob

on the front edge of the cut out. Then,
place them at 86 mm from the side
edges and at 10 mm from the rear
edge, as shown in the diagram, taking
care that the seals meet without
overlapping.

2. Place the hob in the cut out, taking

care that it is centred.

3. Fix the hob with the relevant fixing

clamps, supplied with the injectors kit
(see diagram). When the screws have
been tightened, the excess seal can be
removed.

The edge of the hob forms a double seal which
prevents the ingress of liquids.

Seal

Seal

Seal

Seal

Seal