John Lewis JLBIGH753 Manuale Utente

Operation

For easier lighting, proceed

For easier lighting, proceed
before putting

before putting

before putting a pan on the pan

a pan on the pan

s u p p o r t .

To light a burner:

push in the relevant control and turn
it to maximum position.

Upon ignition, keep the knob pushed
down about 5 seconds

5 seconds

5 seconds. This will

allow the "thermocouple" (Fig. 1 -
letter D

D) to be heated and the safety

device to be switched off, otherwise
the gas supply would be interrupted.

Then adjust the flame as required.

If the burner does not ignite, turn the
control knob to zero, and try again.

If the burner accidentally goes out,

If the burner accidentally goes out,
turn the contr

turn the contr

turn the control knob to the

ol knob to the

ol knob to the “off

“off

“off”””””

position and wait for at least 1

position and wait for at least 1
minute before trying to light the

minute before trying to light the

minute before trying to light the
burner again.

burner again.

Do not keep the control knob

Do not keep the control knob
pressed for more than 15

pressed for more than 15

pressed for more than 15
seconds. If the burner does not

seconds. If the burner does not

seconds. If the burner does not
light even after 15 seconds,

light even after 15 seconds,

light even after 15 seconds,
release the control knob, turn

release the control knob, turn

release the control knob, turn
it to the "off" position and wait

it to the "off" position and wait

it to the "off" position and wait
for at least 1 minute before

for at least 1 minute before

for at least 1 minute before
trying to light the burner again.

trying to light the burner again.

If you use a saucepan which is

If you use a saucepan which is
smaller than the recommended

smaller than the recommended

smaller than the recommended
size, the flame will spread

size, the flame will spread

size, the flame will spread
beyond the bottom of the vessel,

beyond the bottom of the vessel,

beyond the bottom of the vessel,
causing the handle to overheat.

causing the handle to overheat.

Tak

ake car

e car

e care when fr

e when fr

e when fr ying f

ying f

ying food in

ood in

hot oil or fat, as the overheated

hot oil or fat, as the overheated
splashes could easily ignite.

splashes could easily ignite.

Fig. 1

A - Burner cap
B

B - Burner crown
C

C - Ignition electrode
D

D - Thermocouple

)

Instructions for the User

Ultra-rapid Burner

(Triple Cr

riple Cr

riple Cro

o wn)

wn)