Cornelius 750 Pre-Mix Manuale Utente

November 30, 1984

189159001

Revised: December 10, 1991

E

IMI Cornelius Inc; 1984-91

IMI CORNELIUS INC.
One Cornelius Place

Anoka. MN 55303-6234
Telephone (800) 238–3600
Facsimile (612) 422–3246

The purpose of this kit is to replace the original expanded aluminum evaporator, which also doubles as the wa-
ter bath tank, with a new copper tube style evaporator. The old aluminum evaporator remains in place as the
water bath tank only.

A new anode and refrigeration system dual inlet strainer/dryer are also included with the kit and must be instal-
led.

Retain these instructions as part of your equipment manual.

Unpack and inspect the kit. Make sure Loose-Shipped Parts are present and in good condition (see Figure 1).

1

319238088

Suction Line Ass’y

1

2

186843000

Anode

1

3

187969000

Sheet Metal Screw, Phil Pan Hd, Type ‘‘A’’ Alum; No. 10 by 1/2-in.

1

4

185215000

Copper Evaporator Coil

1

5

319225000

Coil Spacer

4

6

320389000

Thread Rolling Screw, Phil Pan Hd, No. 6-32 by 1/4-in.

4

7

960050

Rubatex Insulation, 6-ft. long

1

8

2601

Strainer Dryer, Dual Inlet

1

9

189159001

Instructions

1

Supplies required are as follows:

Brazing alloy ‘‘Phos-Copper’’, ‘‘Silfos’’ or equivalent is required for copper-to-copper connections. These alloys
contain about 15% silver.

Brazing alloy. ‘‘Easy-flow’’ or equivalent is required for copper-to-steel connections. This alloy contains about
50% silver.