Amcor WV-100 Manuale Utente

12

To move a ball bearing shelf, fi rst 
remove all bottles, loosen the 
screws on the shelf, slide out the 
shelf, remove the sliding guides 
from the walls, then refi t them as 
shown below, and fi x the screws.

Your cabinet was designed to store a maximum number of bottles in total security.
We recommend that you observe the tips below to optimize loading.

•  Spread your bottles out as evenly as possible over the shelves, so that weight is not concentrated 

in one point. Also make sure your bottles do not touch the back of the cabinet, or the step at 
bottom. Also make sure that bottles are not all grouped together at the top or bottom of
the cabinet.

•  Observe the loading instructions provided in section 6, according to the type of storage fi xtures 

with which your cabinet is equipped, and never stack bottles on a sliding shelf.

•  Never try to pull out more than one sliding shelf at a time.

Before modifying your Wine Vault's original confi guration in any way, be sure to ask your dealer 
for advice.

Guide

Wall

Guide

Wall