Crane Merchandising Systems 677 Manuale Utente
HDC II Programming Guide
Monetary Setup
July, 2003
14
6730018
INITIAL SETUP OF A NON-STANDARD BILL
VALIDATOR
1.
Connect the bill validator, and follow the steps in "Select Bill Validator",
PAGE 13 to select
PAGE 13 to select
MDB.1.2.5.10.20 in the bill validator selection screens.
MDBK==
<
*
>
will not be an option yet
.
Exit the bill validator setup by press-
ing
. Bill information is now collected from the validator.
2.
Press
, then press
until
MDBK==
<
*
>
displays.
3.
Press
.
1. 1.00 ON will display. The first number (1.) indicates bill
validator channel 1, the
1.00 is the bill denomination, and ON indicates that
the validator will accept $1.00 bills.
4.
Press
to toggle the bill acceptance
ON or OFF.
5.
Press
and
to scroll through the list of other denominations
and
to set them to
ON or OFF.
6.
Press
to move up to the top level screen.
NOTE
If a denomination does not display in the scroll list of available
denominations, check the binary switch settings for the valida-
tor. If the binary switch for a given denomination is set to
“off”, it will not display in the list of denominations.