Vita-Mix PROFESSIONAL SERIES 300 Manuale Utente

14

Wet Blade Container 

Designed for processing liquids including juice, frozen mixtures, sauces, soups, 

purées, batters, and for wet chopping. 

1.  Make sure that the Variable Speed dial is set to 1.
2.  Load the container before placing it on the motor base. Place liquids and soft foods 

in the container first, solid items and ice last. Although not necessary for blending, 

you may want to cut or break food into smaller pieces for more precise measuring 

of ingredients.

3.  Securely fasten the 2-Part lid. Always use the complete 2-Part lid when blending 

(unless the tamper is inserted through the lid plug opening). Especially when 

blending hot ingredients, make sure that the lid is securely latched.

4.  With the motor off, set the wet blade container on the motor base by aligning it 

over the centering pad. Never attempt to put a container on an operating motor 

base or to operate a motor base without a container properly in place.

5.  Start with the On / Off Switch in the On position. Always start your machine on 

Variable Speed 1. Activate the machine by lifting up the Start / Stop Switch to the 

Start ( ) position and slowly increase the Variable Speed to the desired speed.  

Your container will shift and get into an aligned position.

6.  If the mixture stops circulating, you may have trapped an air bubble. If inserting the 

tamper through the lid plug while blending does not release it, reduce the speed on 

the dial to Variable Speed 5. Use the tamper to stir until it “burps.” If these methods 

do not work, stop the motor, remove the container from the motor base, and use a 

rubber spatula to press the air bubble away from the blades. Return the container  

to the motor base, replace the lid, and continue blending.

8.  Due to the machine’s speed, processing times are much quicker than standard 

appliances. Until you are accustomed to the machine, count your time carefully to 

avoid over-processing.

9.  After turning the machine off, wait until the blades completely stop before removing 

the lid or container from the motor base.

OPERATING INSTRUCTIONS

    CAUTION

Never Start on Speeds Above 1 with Hot 

Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald. 

To secure the contents, lock the lid and lid plug 
securely in place prior to operating the machine.

Always start on Variable 1, slowly increase to 10.