Philips HR1744 Manuale Utente

Read the instructions carefully and look at the illustrations before
you start using the appliance.

Failure to properly insert filter may cause damage to 
filter unit from cutting blades.

Do not fill the blender jar with ingredients that are hotter than 
140°F/60°C.

To avoid spillage, do not fill the jar above the maximum level 
indication (5 cups/1.25 liters), particularly when you are 
blending liquids. Always insert the stopper into the lid before 
you start processing.

NEVER use your hand, fingers or any other object in the blender 
jar while the appliance is turned on. If necessary, use a rubber 
spatula to remove food from the wall of the blender jar after
you have turned the Blender off.

Before you start using the Blender, be sure that the blender 
jar is seated firmly or locked into position on motor base.
Do not place jar onto base while motor is running, or in the 
“ON” position (see ‘Preparing the Blender for Use’).

Always make sure that the lid is in “closed position” when 
processing ingredients.

The blender jar is made of glass and therefore breakable. Do not 
drop the jar on a hard floor. Also avoid extreme thermal shocks.
If the blender jar is very cold, rinse it well with lukewarm water 
before pouring in hot liquid.

When blending solid ingredients, cut into 

1-inch pieces first.

Always pour liquids into blender jar before adding solid 
ingredients.

To add ingredients while you are already in the process of mixing,
remove the stopper from the lid and insert ingredients through 
the hole.

Never pour boiling liquid into the blender jar.

Do not use the filter to process hot ingredients.

Make sure that the filter has been properly inserted before you 
switch the appliance on.