Smeg LSPX1253 Manuale Utente

 

 
 

 

CANCELLING THE CURRENT PROGRAM 
To annul the current program, press the START/PAUSE button (4) for a 
few seconds, until the PROGRAM STARTED light (5) stops flashing. 
Now press the START/PAUSE button (4) again until "P0" appears on the 
display (about 10 seconds). 

 
 
 

 

CHANGING THE PROGRAM 
To modify the program keep the START/PAUSE button (4) pressed for a 
few seconds, until the PROGRAM STARTED indicator light (5) stops 
flashing, then select the new program following the instructions provided 
above; press the START/PAUSE button (4) again and keep it pressed 
for a few seconds, until the indicator light (5) starts to flash again.

 

 
 
 

 

 

 

This function is ideal for small loads and saves water and electricity. It is
controlled by the HALF LOAD (10) button, with two alternatives:
1)  press the button once to select washing in the top basket (the

relative light comes on);

2)  press the button a second time to select washing in the bottom

basket (the relative light comes on);

3)  press the button a third time to return to the normal full load

washing mode (washing in both baskets, both lights off).