Smeg DFC612S Manuale Utente

 

 

34 

 

 

The appliance is not able to "measure" the 
amount of water loaded accurately. Interrupt 
the program and switch off the dishwasher. 
Switch the dishwasher back on, program it 
again and start the washing cycle. If the 
problem persists, contact the after-sales 
service.

 

Alternate washing system malfunction 
Interrupt the program and switch off the 
dishwasher. Switch the dishwasher back on, 
program it again and start the washing cycle. If 
the problem persists, contact the after-sales 
service. 

Water intake system malfunction 
Contact the after-sales service. 

 
 

 
 

If an alarm occurs the appliance interrupts the program in progress and 
signals a fault. 

 

• 

Alarms  E1, E2, E3, E4, E8 and  E9 interrupt the current program 
immediately. 

• 

The  E5,  E6 alarms interrupts the running program once the cause is 
resolved, it will bring bach the execution of the program. 

• 

The alarm E7 is visualized at the end of the cycle that comes, however, 
brought to the end since the operation of the dishwasher is not harmed. 

To “reset” an alarm is necessary: 

 

• 

Open and close the door, or turn off and on the machine. At this point is 
possible to program the dishwasher again.