Smeg PLA6246X Manuale Utente

 

 

 

 

The dishwasher is capable of signalling a number of faults through the 
simultaneous illumination of several indicator lights, with the following 
meanings: 

 
 

Acquastop failure 
The anti-flooding system has been activated. 
The system is tripped in case of water leaks. 
Contact the after-sales service. 

Safety level 
The system which limits the water level inside 
the dishwasher has been tripped. Interrupt the 
program and switch off the dishwasher. Switch 
the dishwasher back on, program it again and 
start the washing cycle. If the problem persists, 
contact the after-sales service. 

Water heating malfunction 
The water is not heated or the heating 
parameters are not correct. Repeat the 
washing program; if the problem persists, 
contact the after-sales service. 

Water temperature monitoring malfunction 
Interrupt the program and switch off the 
dishwasher. Switch the dishwasher back on, 
program it again and start the washing cycle. If 
the problem persists, contact the after-sales 
service. 

Water intake malfunction 
The appliance does not take in water or does 
not do so correctly. Check that the water 
connections are correct, the water intake tap is 
turned on and the filter is not fouled. If the 
problem persists, contact the after-sales 
service. 

Water pump-out malfunction 
The appliance does not pump out the water or 
does not do so correctly. Check that the drain 
hose is not kinked or crushed and that the 
siphon and filter are not fouled. If the problem 
persists, contact the after-sales service.