Estate TUD6710P Manuale Utente

Press the desired cycle. Turn the cycle control knob to the 
desired cycle. If the door is latched, you will hear the cycles start 
and stop as the cycle control knob passes each cycle mark. This 
is normal and does not hurt the dishwasher. If you prefer, you can 
set the cycle control knob with the door unlatched.

To use Rinse & Hold, press any cycle and turn the cycle control 
knob to Rinse & Hold.

NOTE: Use the Air Dry option with the Rinse & Hold cycle.

A “●” shows what steps are in each cycle. Your model may have 
some or all of the cycles shown.

Temperatures indicate where extra heat is added. The cycle 
control knob pauses as the water heats.

Water usage is shown in U.S. gallons/liters.

This model meets the ENERGY STAR

® 

 guidelines for energy 

efficiency.

Cycle time includes dry time. An asterisk ( * ) by the cycle time 
indicates the cycle time might be longer depending on the 
temperature of the water entering the dishwasher. The cooler the 
water, the longer the cycle time. If the water is already hot 
enough, the cycle time will be as shown.

†

A small amount of water runs through the pump to remove soil 
particles.

You can cancel a cycle at anytime.

1. Turn the cycle control knob slowly clockwise until you hear 

water draining. Let the dishwasher drain completely.

2. Open the door.

3. Turn the cycle control knob to Off.

Use this cycle for hard-to-clean, heavily soiled pots, pans, 
casseroles, and regular tableware.

●

●

●

●

●

●

Use this cycle for heavily soiled loads.

●

●

●

●

●

Use this cycle for loads with normal amounts of food soil. (The 
energy-usage label is based on this cycle.) 

●

●

●

●

Use this cycle for prerinsed or lightly soiled loads. 

●

●

●

●

Use this rinse cycle for rinsing dishes, glasses, and silverware 
that will not be washed right away.

●