Saeco Coffee Makers HD8775 Manuale Utente
12
ENGLISH
Measuring and Programming Water Hardness
Water hardness measuring is very important in order to defi ne the descal-
ing frequency and to install the “INTENZA+” water fi lter (for more detail on
the water fi lter, see next chapter).
ing frequency and to install the “INTENZA+” water fi lter (for more detail on
the water fi lter, see next chapter).
To measure the water hardness follow the steps below:
1
Immerse the water hardness test strip (supplied with the machine) in
water for 1 second.
Note:
The test strip can only be used for one single measurement.
2
Wait for one minute.
23
4
A
B
C
In
tenza Ar
oma S
y
st
em
M
achine
W
a
ter Har
dness S
etting
1
3
Check how many squares have changed to the color red and then refer
to the table.
Note:
The numbers on the water hardness test strip correspond to the water
hardness adjustment settings.
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
“INTENZA+” water fi lter (see next chapter).
“INTENZA+” water fi lter (see next chapter).
Y
ello
w
4
Press the “
” button and scroll the pages by pressing the “
” button
until the following icon is displayed.
Note:
The machine is supplied with a standard water hardness setting, suitable
for most types of water.
for most types of water.