Panasonic AW-PH405N Manuale Utente

8



This rotates in the horizontal direction.





Where a switch is pushed in, the unit’s power is turned 
on, and the unit’s power is turned off after the switch has 
jumped out.



Connect the accessory AC power cable to this inlet.



M5 mm hexagon socket head screws (with flat 
washers, spring washers) ( of each provided as 
accessories)
These parts are used to secure the camera mounting 
base to the rotary arm.



This is lighted up red by the selected signals.



M5 mm hexagon socket head screws (with flat 
washers, spring washers) (4 of each provided as 
accessories)
These parts are used to secure the rotary arm to the 
rotary head.



This rotates in the vertical direction.



Mount the convertible camera or multi-purpose camera 
on this base.



These four holes are used when installing the pan-tilt 
head.



Use the unit with this panel in position.



The prompter is connected to this connector. 
The maximum current which can be supplied from the DC 
1 V OUT socket is .5 A.
When the prompter is connected, the pan-tilt head’s 
speed is reduced to about one-third. 
When connecting the prompter, be absolutely sure to  
short-circuit the DETECT terminal (Pin No.14) and the 
GND terminal (Pin No.15).

  Consult your dealer when a prompter is to 

be installed since it will be necessary for 
the balance between the mounting fixture 
and overall weight and other aspects to be 
checked.

1

– – –

9

– – –

PROMPTER VIDEO

10

PROMPTER VIDEO GND

– – –

11

– – –

4

DC 1 V OUT

1

– – –

5

GND

1

– – –

6

– – –

14

DETECT

7

– – –

15

GND

8

– – –



Use this to determine the direction in which the camera is 
to be mounted.



These are used to secure the camera firmly after it has 
been mounted.



For normal operation, use the unit with this panel in 
position.