Pioneer PDR-W739 Manuale Utente

This section takes you through using the basic playback controls of
the CD changer and CD-R. The steps below describe playing a disc
in tray 1 of the disc changer, but the playback controls for the CD-R
and for other discs loaded into the changer work in exactly the
same way.

The display lights up.

0 (front panel

• To open the CD-R tray, press 

0 on the

right-hand side of the unit.

Place a CD, with the label face up, on to the disc tray,
making sure that it is seated properly in the disc guide.

Note: Do not use an adapter when playing 8cm CD-
singles. The disc tray has guides for both 12cm and 8cm
discs.

0 again to

• For CD-R playback, press 

 on the remote control

(

6 on the front panel).

8 (6 on

To resume playback, press again.

1 or ¡ (41 or

¡¢ on the front panel).

Release to resume normal playback.

If you reach the end of the disc while pressing 

¡

(

¡¢), the display shows 

 and the recorder goes

into play-pause mode (you can still reverse-search).

4 or ¢ (41 or

¡¢ on the front panel).

Pressing 

¢ (¡¢) once skips to the start of the

next track on the disc. Further presses take you to
subsequent tracks.

Pressing 

4 (41) once takes you to the beginning

of the current track. Further presses skip to the start of
previous tracks.

You can use the track skip buttons while the disc is paused
or stopped, too. The track number changes while the disc
remains paused/stopped.

• For track numbers 1 to 10, use the corresponding number.

• For track numbers over 10, press the 

>10 button, then enter

the track number. For example, to select track 20 press 

>10,

2, then 10/0.

7.

If the disc was paused, then the pause mode is canceled.

Remove the disc from the recorder before switching off.

&

*

#

!

⁄

$

›

Î

—

 

_

 

4 1

¡ ¢

6

7

0

0

0

4 1

¡ ¢

6

7

0

◊ÛB¿ˆ≥≤/