Pioneer PDR-W739 Manuale Utente

Although you can’t erase tracks on a CD-R disc, you can set what
are called ‘skip IDs’. These tell a CD player (though many do not
recognize skip IDs) not to play a particular track, but to skip to the
next one on the disc.

You can also set skip IDs on CD-RWs, although it's probably a less
useful feature since you can always erase the last track.

Once a skip ID is set, you can clear it, but be careful: you can set up
to 21 skip IDs per disc, but repeatedly setting and clearing skip IDs
in different recording sessions will reduce this number.

Setting skip IDs:

The display indicates that you’re in skip set/clear mode and
playback starts.

4 and ¢ buttons to

 The 

 indicator lights if the track playing is already

marked with a skip ID.

The 

 indicator starts to blink.

• If the track you selected in step 2 above already had a skip

ID set, playback jumps to the next track that doesn’t have a
skip ID set.

• Use the 

4 and ¢ buttons if you want to change the

track again here.

• If there's no room left on the disc to record another skip ID,

the display will show the message 

.

The 

 indicator lights in the display once a skip ID has

been set.

• To cancel, press 

7.

7 to stop

0 (CD-R side).

Until you eject the disc, the recorder stores the skip ID
information in its memory. On pressing 

0, the recorder

writes the skip ID information onto the disc.

Be careful: don’t switch off the unit before ejecting the
disc—you’ll lose this sessions skip ID changes!

&

#

$

›

Î

4 1

¡ ¢

7

0

◊ÛB¿ˆ≥≤/