Dacor MOV Manuale Utente

Planning the Installation

Installation Instructions

Electrical Specifications

•  Preheat times and cavity temperature recovery times 

will be increased slightly if operating on less than a 

240 Vac circuit.

•  This appliance is provided with electrical connection 

leads in a flexible metal conduit. These leads may be 

a smaller gage than the standard household wiring of 

the dedicated supply circuit, but they are suitable for 

connection to these circuits under the jurisdiction of 

the National Electric Code, and/or the local inspection 

authority.

•  Locate the junction box so that the wiring may be dis-

connected without removing the oven from the wall.

It is the owner’s responsibility to ensure that a qualified 

electrician performs the electrical connection of this appli-

ance. The electrical installation, including minimum supply 

wire size, must comply with the National Electric Code 

ANSI/NFPA 70 (latest revision) and local codes and ordi-

nances.
A copy of this standard may be obtained from:
National Fire Protection Association  

1 Batterymarch Park 

Quincy, Massachusetts 02269-9101
The correct voltage, frequency and amperage must be sup-

plied to the appliance from a dedicated, grounded, single 

phase circuit that is protected by a properly sized circuit 

breaker or time-delay fuse. If a time-delay fuse is utilized, 

fuse both sides of the line (L1 and L2).

Single 27”

240 Vac 60 Hz.,  

4 wire*, 30 Amp. 

dedicated

4.6 kW (19.5 Amp.)

Single 30”

Double 27”

240 Vac 60 Hz.,  

4 wire*, 50 Amp. 

dedicated

9.25 kW (38.9 Amp.)

Double 30”

* Two 120 Vac hot (L1 and L2), one neutral, one ground.
The above electrical ratings are for reference only. For the 

exact ratings see the product data plate. See page 3 for 

location.

Verify that all the parts are included. If any item is missing 

or damaged, please contact your dealer immediately. Also 

make certain that you have all tools and parts necessary to 

ensure a proper installation before proceeding.
•  Exhaust deflector

◊  27” defector - PN 46050B 

or

◊  30” deflector - PN 46051B

•  Mounting and exhaust deflector screw kit

◊  Single oven screw kit - four (4) 3/4” mounting 

screws, four (4) 1 1/4” mounting screws and three 

(3) exhaust deflector screws - PN 700486-1 

or

◊  Double oven screw kit - Six (6) 3/4” mounting 

screws, six (6) 1 1/4” mounting screws and three 

(3) exhaust deflector screws - PN 700486-2

•  Meat probe, one (1) - PN 72723
•  Broiler grill and pan - PN 12157

Parts List

•  Standard oven racks two (2) for a single oven, five (5) 

for a double oven
◊  27” standard rack - PN 72747 

or

◊  30” standard rack - PN 72713

•  GlideRack™ oven rack, one (1)

◊  27” GlideRack™ oven rack - PN 72948 

or

◊  30” GlideRack™ oven rack - PN 72949

•  Stainless steel cleaner - stainless steel models only 

PN A302

•  Product literature