Insys GSM 4.2 I4 11-02-01-03-01.038 Manuale Utente
Codici prodotto
11-02-01-03-01.038
INSYS GSM 4.2 I4
Overview
18
Dez-06
2.7
Interfaces, Display and Control Elements
The device has 6 LEDs for status displays and one reset key on the front.
2.7.1 Display elements
Each device has 6 LEDs on the front.
LED
Color
On
Off
Blinking
Flashing
Power
Green
Supply OK
No supply
Status
Yellow
GSM engine
logged into
network*
logged into
network*
GSM engine not
logged into
network*
logged into
network*
Data connection
Alternate blinking
with LED Connect, or
LED DCD: Factory
settings loaded
Alternate blinking
with LED Connect, or
LED DCD: Factory
settings loaded
Initialization,
Processing of
alarms
alarms
,
Dispatch of
periodic alive
SMS, SMS poll-
ing and power
up SMS
periodic alive
SMS, SMS poll-
ing and power
up SMS
Connect
Yellow
Data connec-
tion established
tion established
No data connec-
tion established
tion established
Alternate blinking
with LED state: Fac-
tory settings loaded
with LED state: Fac-
tory settings loaded
RX
Green
Exchange of
data via RS232
data via RS232
No data ex-
change
change
TX
Green
Exchange of
data via RS232
data via RS232
No data ex-
change
change
Signal
Green
Best GSM signal
(field strength)*
(field strength)*
GSM signal
(field strength)
too low*
(field strength)
too low*
Blinking interval
depending on GSM
signal (field
strength)*:
The higher the blink-
ing frequency, the
better the signal.
(see Chap. 3.9)
Blinking in intervals
of seconds during
the flash update
depending on GSM
signal (field
strength)*:
The higher the blink-
ing frequency, the
better the signal.
(see Chap. 3.9)
Blinking in intervals
of seconds during
the flash update
*) The periodical query of the login state and the GSM field strength must be active (command
AT**GSMREQ
AT**GSMREQ
).