Insys GSM 4.2 I4 11-02-01-03-01.038 Manuale Utente
Codici prodotto
11-02-01-03-01.038
INSYS GSM 4.2 I4
Functions and their configuration
62
Dez-06
Perform flash update:
Entry in terminal
AT**FLASH
The flash update process starts if the ESC
character key is pressed within 60 seconds.
This prompt also appears for every restart
(with a timeout of 2 seconds).
character key is pressed within 60 seconds.
This prompt also appears for every restart
(with a timeout of 2 seconds).
Start Update with Esc, Reset with @
Prompt for sending
Send the firmware as *.MHX file.
Send the firmware as *.MHX file.
Expecting download with 8N1
Required settings of the terminal program:
Log:
ASCII
Data format:
8N1
Handshake:
Hardware
The device will perform a complete reset after the flash update is finished.
If necessary, the device will load the default factory settings. The SIM card PIN will re-
main unchanged.
Pertinent AT commands
AT**FLASH
Firmware update of the controller
6.7
Operation with PLCs
Generally, the device will be connected to a PLC or a PC with a pertinent application via
the serial interface and will provide the data connection for it via GSM to the remote de-
vice.
Depending on which PLC you are connecting, you must initialize the device or the mo-
dem accordingly.
the serial interface and will provide the data connection for it via GSM to the remote de-
vice.
Depending on which PLC you are connecting, you must initialize the device or the mo-
dem accordingly.