Graco 258907 Manuale Utente

This device complies with Part 15 of the FCC rules.  
Operation is subject to the following two conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference that may 
be received, including interference that may cause 
undesired operation.

Changes or modifications not expressly approved by 
Graco, Inc. could void the user's authority to operate this 
equipment.

This product meets the applicable Industry Canada 
technical specifications/Le présent materiel est con-
forme aux specifications techniques applicables 
d’Industrie Canada.

1.

Turn flow control knob fully counterclockwise to OFF 
position.

2.

Place deflector in hopper or suitable container.

3.

Turn prime valve handle to PRESSURE RELIEF 
position.

4.

Display will read “----” when all pressure is relieved. 
If display does not reach 0, the hose or inline valve 
are clogged and prime/tool fill/ recirculation valve is 
plugged. 

This appliance is rated more than 15 A and is for use 
on a circuit having a nominal rating of 120 V and is fac-
tory equipped with a specific electric cord and plug. No 
adapter should be used with this appliance. If the appli-
ance must be reconnected for use on a different type of 
electric circuit, the connection should be made by qual-
ified service personnel; and after the connection, the 
appliance should comply with all local codes and ordi-
nances.

Consult a qualified electrician if there is any doubt as to 
whether an outlet box is properly grounded.

The sprayer must be grounded. Grounding reduces the 
risk of static and electric shock by providing an escape 
wire for the electrical current due to static build up or in the 
event of a short circuit.

The sprayer cord includes a grounding wire with an 
appropriate grounding contact.

The plug must be plugged into an outlet that is properly 
installed and grounded in accordance with all local 
codes and ordinances.

Do NOT tamper with relief valve or devices that control 
maximum flow control during normal operation. Bodily 
injury and/or damaged to equipment can occur.

ti8793a

ti14876a

bar/psi

ti15614a