Insys GPRS 4.2 11-02-01-03-10.008 Manuale Utente
Codici prodotto
11-02-01-03-10.008
Manual Supplement Insys GSM/GPRS 4.0
25
Version 1.0 / 07.03
3.2.2 Modem Compatible Connection Set-Up
The INSYS GSM/GPRS 4.0 provides the possibility to perform the dial-up to the
GPRS network with the dialing command ATD known from the modems.
If a PDP context is defined (see above), this command reads: ATD*99***1#
The “1” stands for the PDP context no. 1 in this case, which has been defined
GPRS network with the dialing command ATD known from the modems.
If a PDP context is defined (see above), this command reads: ATD*99***1#
The “1” stands for the PDP context no. 1 in this case, which has been defined
before.
The connection establishment is indicated by the control signal DCD and by the
message “CONNECT”.
The connection establishment is indicated by the control signal DCD and by the
message “CONNECT”.
3.2.3 Modem Compatible Connection Termination
The connection can be terminated as usual for modems with the command
ATH.
ATH.