Lanier LD225 Manuale Utente

141

R WARNING:

R CAUTION:

❒ Do not turn the power off while

the On indicator is lit or blinking.
Doing so may damage the hard
disk.

❒ Before unplugging the power cord

or turning off the main power
switch, make sure remaining
memory  space is at 100%, as
shown on the display. See p.26
“Turning Off the Power” and p.26
“Turning Off the Main Power”.

• When you use this machine for a

long time in a confined space with-
out good ventilation, you may de-
tect  an  odd  smell.  To  keep  the
workplace comfortable, we recom-
mend that you keep it well venti-
lated.

• Do not touch areas on or around

the fusing unit. These areas may
become hot

• After scanning originals continu-

ously, the exposure glass may be-
c o m e   w a r m — t h i s   i s   n o t   a
malfunction.

• The area around the ventilation

hole might feel warm. This is
caused by exhaust air and is not a
malfunction.

• When the machine is not in use

and in stand-by mode, you may
hear a small noise inside. This is
caused by the image stabilization
process and is not a malfunction.

• Do not turn off the power when

the machine is in operation.

• The machine might not produce

good copy images if condensation
forms inside as a result of rapid
temperature change.

• Do not open the covers of the ma-

chine when it is in operation. If you
do, misfeeds might occur.

• Do not move the machine when

the power is on.

• If you operate the machine im-

properly or a machine failure oc-
curs, settings might be lost. Be sure
to make a note of your machine
settings.

• The supplier shall not be liable for

any loss or damage resulting from
mechanical failure, loss of settings,
or use of the machine.

• Unplug the power cord from the