Pioneer D514 Manuale Utente

You can make an audio or a video recording
from the built-in tuner, or from an audio or video
source connected to the receiver (such as a CD
player or TV) through the analog jacks. You will
need to connect a CD recorder, tape deck, MD,
VCR, or DVR deck  to the 

CD-R/TAPE/MD or

DVR/VCR outputs on the receiver to do so (see
pages 13–14 for more on this).

• The receiver's volume, balance, tone (bass,
treble, loudness), and surround effects have
no effect on the recorded signal.

Use the 

INPUT SELECTOR buttons to do this.

Press 

SIGNAL SELECT on the front panel to

select the input signal corresponding to the
source component (see page 29 for more on
this).

Tune to the radio station, load the CD, video,
DVD etc.

either the CD-R/TAPE/MD or DVR/VCR
outputs).
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.

Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
automatically—check the component’s
instruction manual if you’re unsure.

XRE3077A.En.37.40

03.12.4, 7:50 PM

41