Chauvet 412 Manuale Utente
Operation
Legend™ 412 Series User Manual Rev. 5
-13-
Master/Slave
The Master/Slave mode allows a group of Legend™ 412’s or Legend™ 412 VW’s (the
slave units) to simultaneously duplicate the output of another Legend™ 412 or Legend™
412 VW (the master unit) without a DMX controller.
1. Set each of the slave units:
1. Set each of the slave units:
a. Go to
SLNd and press <ENTER>.
b. Select
SL 1 (duplicates the master unit exactly) or SL 2 (offsets pan and tilt
settings that creates a different look).
2. Set the master unit:
a. Go to
SLNd and press <ENTER>.
b. Select
NASt.
c. Go to
ShNd and press <ENTER>.
d. Select the desired auto program (
Sh 1~4).
Do not connect a Legend™ 412 together with a Legend™ 412 VW in Master/Slave
mode.
•
The master unit is the one that runs an auto program.
•
Do not connect a DMX controller to the units configured for Master/Slave
operation.
•
The master unit should be the first unit in the DMX daisy string.
Color Settings
(Legend™ 412 Only)
The color setting determines how the Legend™ 412 generates the white color based on
various RGB settings.
1. Go to
1. Go to
bALA and press <ENTER>.
2. Select
red, Gree, or bLue.
3. Select the desired color value (
125~255).
4. Repeat for the other colors.
Blackout Mode
This setting determines whether the Legend™ 412 or the Legend™ 412 VW starts playing
an auto program when powered up or remains static in the “Home” position.
1. Go to
1. Go to
bLnd and press <ENTER>.
2. Select
YeS or no.
Display Mode
This setting determines whether the control panel display stays on indefinitely or turns off
after 2 minutes of inactivity.
1. Go to
1. Go to
Led and press <ENTER>.
2. Select
YeS or no.
Pan Invert
This setting allows the user to invert the direction of the pan control.
1. Go to
1. Go to
PAn and press <ENTER>.
2. Select
YeS or no.
Tilt Invert
This setting allows the user to invert the direction of the tilt control.
1. Go to
1. Go to
tILt and press <ENTER>.
2. Select
YeS or no.
Display Invert
This setting allows the user to invert the direction of the control panel display.
1. Go to
1. Go to
Led and press <ENTER>.
2. Select
on or oFF.