Emerson I-0021 Manuale Utente

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

↓↓

Security codes

↓↓

In the menu "Security Setup" you can enable a security code for the entering of the "Basic
level" as well as for the "Expert level" and for the "System level".
Caution: If you enable a security code and forget it, you will not have any possibility to
enter the locked level!

How to setup and to enable the security codes:

• 

(factory setting: 12345):

• 

(factory setting: 12345):

• 

(factory setting: 54321):

„ 

Go to the line

„ 

"Define basic level security PIN..." resp.

„ 

"Define expert level security PIN..." resp.

„ 

"Define system level security PIN..."

„ 

with the 

↑↑

 -key or the 

↓↓

 -key and change to the corresponding submenu with the 

88 

 -

key or the 

→

→

 -key (see illustration on the next page; "basic level" as example).

• 

Put in the code you want with the function keys F1, ..., F5:

„ 

The sequence of the code numbers will appear in the line "Actual PIN".

• 

Notes:

„ 

"1" is attached to F1, "2" to F2 and so on. The characters displayed above the
function keys will not be displayed as code numbers.

„ 

If your input was wrong, you can repeat as often as you want until the sequence of
the digits will be in your way.

„ 

If the input of the security code is done, you can go back to the menu "Security
Setup" with the 

←

←

 -key.

 

Measure

Back...

TAG

37.50 ppm

-- Security Setup --

Basic level security:

Disabled

Expert level security:

Disabled

System level security:

Disabled

Define expert level security PIN...
Define system level security PIN...

Define basic level security PIN...