Optimus 12-2155 Manuale Utente
10
1. Connect the gray wire to the right
front speaker’s positive terminal.
This terminal is usually marked
with a plus (+) sign or red mark.
This terminal is usually marked
with a plus (+) sign or red mark.
2. Connect the gray/black wire to the
right front speaker’s negative ter-
minal. This terminal might be
marked with a minus (
minal. This terminal might be
marked with a minus (
–
) sign or it
might not be marked at all.
3. Connect the white wire to the left
front speaker’s positive terminal.
4. Connect the white/black wire to
the left front speaker’s negative
terminal.
terminal.
5. Connect the violet wire to the right
rear speaker’s positive terminal.
6. Connect the violet/black wire to
the right rear speaker’s negative
terminal.
terminal.
7. Connect the green wire to the left
rear speaker’s positive terminal.
8. Connect the green/black wire to
the left rear speaker’s negative
terminal.
terminal.
Connecting One Pair of
Speakers
Speakers
For 12-2155: If you are using only one
pair of speakers, follow Steps 1
pair of speakers, follow Steps 1
–
4 in
“Connecting Two Pairs of Speakers”
on Page 9 to connect the harness with
the 14-pin connector to the speakers.
on Page 9 to connect the harness with
the 14-pin connector to the speakers.
For 12-2154: If you are using only one
pair of speakers, remove the tape that
holds the mounting sleeve in place
and slide the sleeve off of the stereo.
Then set
pair of speakers, remove the tape that
holds the mounting sleeve in place
and slide the sleeve off of the stereo.
Then set
2CH/4CH
on the bottom of
the stereo to
2CH
. Then follow these
steps to connect the harness with the
14-pin connector to the speakers.
14-pin connector to the speakers.
(illus)
(illus)
(illus)
12-2154.fm Page 10 Wednesday, July 14, 1999 3:34 PM