Symbol Technologies MC9000-S Manuale Utente

1-13

The mobile computer main and backup batteries can be charged using a cradle, the CAM or the MSR. 
The CAM and the MSR also require a charging cable and a Symbol approved power supply.

1.

Connect the charging accessory to the appropriate power source, see 

 for setup information.

2.

Insert the mobile computer into a cradle or attach the appropriate snap-on module.

3.

The mobile computer starts to charge automatically. The amber charge LED, in the Indicator 
LED Bar, lights to show the charge status. See 

 for charging indications.

The main battery usually fully charges in less than four hours.

The mobile computer has three accessories that can be used to charge spare batteries.

•

Single Slot Serial/USB Cradle

•

Four Slot Spare Battery Charger

•

UBC  Adapter.

To charge a spare battery:

1.

Connect the charging accessory to the appropriate power source, see 

2.

Insert the spare battery into the spare battery charging slot and gently press down on the 
battery to ensure proper contact.

3.

The battery starts to charge automatically. The amber charge LED on the accessory lights to 
show the charge status. See 

 for charging indications.

Off

Mobile computer not in cradle/CAM/MSR; mobile computer not placed correctly; 
charger is not powered.

Fast Blinking Amber

Error in charging; check placement of the mobile computer.

Slow Blinking Amber

Mobile computer is charging.

Solid Amber

Charging complete.

Note: When the battery is initially inserted in the mobile computer, the amber LED 
flashes once if the battery power is low or the battery is not fully inserted.