Symbol Technologies MC9000-S Manuale Utente

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide

2-24

Power Button

Press the red Power button to turn the mobile computer screen on and off. The mobile computer is on
when the display is on and the mobile computer is in suspend mode when the display is off. For more
information, see

Starting the Mobile Computer on page 1-17

Do not hold down any key, button or the scan button, other than the Power
button during a reset.

Cold boot resets the mobile computer, to the default settings. All added applications and
all stored data will be removed. Do not cold boot without support desk approval.

Any data previously synchronized with a computer can be restored during the
next ActiveSync operation. See

Chapter 4, Communications

for detailed

ActiveSync instructions.

The Power button is also used to reset the mobile computer by performing a warm or cold boot.

•

Warm Boot (Soft Reset) - Resets the mobile computer.

•

Cold Boot (Hard Reset) - Resets the mobile computer, removes all added applications, stored
data restores the default settings.

For information about rebooting the mobile computer, refer to

Resetting the Mobile Computer on page

2-39

Headphone

An optional headphone is available. The headset plugs into the optional headphone jack located at
the top of the mobile computer, see

Figure 1-2 on page 1-4

. Set the mobile computer volume

appropriately before putting on the headset. When a headset is plugged into the jack, the speaker is
muted.