Sony 2 Manuale Utente
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
252
Setup Relating to Switcher Processor
2
Using any of the following methods, select the GPI output port.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
3
Press [GPI Link Adjust].
The GPI Link Adjust menu appears.
The status area shows the current setting state of the selected link, and a
list of the selectable video names or button names, together with the GPI
link Enable/Disable setting for each bus.
The status area shows the current setting state of the selected link, and a
list of the selectable video names or button names, together with the GPI
link Enable/Disable setting for each bus.
4
Using any of the following methods, select what the setting applies to. For
each GPI port there can be up to eight links.
each GPI port there can be up to eight links.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the selection.
a) These include main pair numbers 1 to 128, and “Cut” and “Auto Trans” on each operating
bank.
5
In the <Video/Button> group, press [Select].
The selected video or button name is reflected in the status area.
To clear a video/button name link
Make the selection to which the setting applies, then in the <Video/
Button> group press [Clear].
Make the selection to which the setting applies, then in the <Video/
Button> group press [Clear].
6
To select for each bus whether the GPI link setting is enabled or disabled,
use any of the following methods to select the bus to which the setting
applies.
use any of the following methods to select the bus to which the setting
applies.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
Knob
Parameter
Adjustment
Setting values
1
GPI Port
GPI output port selection
1 to 8
Knob
Parameter
Adjustment
Setting values
1
GPI Port
GPI output port selection
1 to 8
2
Link No
Link number selection
1 to 8
3
Video/Button No
Video or button name
selection
selection
1 to 136
a)