Samsung RF24FSEDBSR Manuale Utente

Pagina di 40
setting up
 
_21
01 SETTING 
UP
Parts for water line Installation
Water line fi xer and screws
Pipe connector
Water line
Connecting to the water supply line
1.  First, shut off the main water supply line.
2.  Locate the nearest cold, drinking water line.
3.  Follow the Water line Installation Instructions in 
the installation kit.
CAUTION
The water line must be connected to 
the cold water pipe. If it is connected 
to the hot water pipe, it may cause the 
purifi er to malfunction.
Close Main
Close Main
Water pipe
Water pipe
Close Main
Close Main
Water pipe
Water pipe
No gap
No gap
4.  After connecting the water supply to the water 
fi lter, turn your main water supply back on 
and dispense about 3L to clear and prime the 
water fi lter.
Connecting the water line to the 
refrigerator
1.  Remove the cap from the water line on the unit 
and insert the compression nut of the water 
line into the water line on the unit.
2.  Connect the water line on the unit with the 
water line in the kit .
3.  Tighten the compression nut onto the 
compression fi tting. There should be no gaps 
between (A, B & C )
4.  Turn water on and check for any leakage.
Only connect the water line to a drinkable 
water source. If you have to repair or 
disassemble the water line, cut off 6.5mm 
of the plastic tubing to make sure you get 
a snug, leak-free connection.
Remove 
Remove 
cap
cap
Water Line
Water Line
from unit
from unit
Water Line
Water Line
from Kit
from Kit
No gap
No gap
Loosen a
Loosen a
Before being used, the leakage in these 
places should be examined.
•  Samsung Warranty does not cover 
WATER LINE 
INSTALLATION.
•  It will be done at 
customer’s charge 
unless the retail 
price includes 
installation cost.
•  Please contact Plumber or Authorized Installer 
for the installation if needed.
•  If Water leakage occurs due to improper 
installation, Please contact installer.
CAUTION
DA68-02916A (EN)-07.indd   21
DA68-02916A (EN)-07.indd   21
2014. 5. 19.   
 2:06
2014. 5. 19.   
 2:06