Samsung SR-30RMB Manuale Utente
11
TWIST ICE MAKER
Making Ice Cubes
1
Remove the ice cube tray by pulling it towards you.
`
2
Fill the tray with water up to the maximum water level marked on
the rear of the tray.
the rear of the tray.
3
Slide the tray back into the holder, taking care not to spill the
water.
water.
4
Wait until the ice cubes are formed.
Freezing time:
It is recommended that you wait for about one
hour with the temperature set to HIGH for the ice
cubes to form.
hour with the temperature set to HIGH for the ice
cubes to form.
Removing the Ice Cubes
1
Make sure that the ice cube storage bin is in place under the ice
cube tray. If not, slide it into place.
cube tray. If not, slide it into place.
`
2
Twist one of the levers firmly in the clockwise direction until the
tray twists slightly.
tray twists slightly.
Result:
The ice cubes fall into the storage bin.
3
Repeat Step
2
for the other half of the tray, if necessary.
4
Remove the storage bin by:
◆
Lifting it slightly
◆
Pulling it towards you
MOVABLE ICE TRAY
Making ice cubes
1
Remove the ice cube tray by pulling it towards you.
`
2
Fill the tray with water up to the maximum water level marked on
the rear of the tray.
the rear of the tray.
3
Place it under the freezer shelf or on the freezer shelf .
Removing the ice cubes
To remove ice cubes, hold the tray at its ends and twist gently.
GB
Making Ice Cubes (OPTION)
SR-30/34/37/40/ENG 11/15/59 3:44 PM Page 11