Jenn-Air W10728796A Manuale Utente

■

The recommended settings should be correct for normal 
household usage. The controls are set correctly when milk or 
juice is as cold as you like and when ice cream is firm.

■

The actual temperature may differ from the display when a 
door is open for an extended period of time.

The factory recommended set points are 0°F (-18°C) for the 
freezer and 37°F (3°C) for the refrigerator
1. Press the FRIDGE or FREEZER touch pad.

NOTE: After the refrigerator is turned on, the Over 
Temperature audio alarm and indicator light may activate 
every 1

¹⁄₂ hours until the refrigerator and freezer temperatures 

are below 48°F (9°C) and 15°F (-9°C), respectively, or until the 
alarm is turned off. To turn off the audio alarm and indicator 
light, see “Alarm Reset.” 

1. Press the FRIDGE or FREEZER touch pad.
2. Press and hold the COOLING OFF touch pad for 3 seconds.

NOTE: To turn off the power completely, use the power ON/
OFF switch located behind the top grille. See “Power On/Off 
Switch.”

1. Press °C touch pad. To redisplay degrees Fahrenheit, press °F 

touch pad. 
NOTE: If the freezer temperature is below zero, the negative 
sign next to the freezer display will light up. This is normal. 

NOTE: Wait at least 24 hours between adjustments. Recheck the 
temperatures before other adjustments are made.

■

Press the FRIDGE or FREEZER touch pad, and then press the 
Plus (+) or Minus (-) touch pad until the desired temperature is 
reached.

■

Press the SAVE touch pad to program the desired 
temperature.

NOTE: The set point range for the freezer is -5°F to 3°F
(-21°C to -16°C). The set point range for the refrigerator is 34°F to 
42°F (1°C to 6°C).

 

The Max Ice feature speeds up the ice production rate to assist 
with periods of heavy ice usage. 

■

Press OPTIONS, and then press MAX ICE to turn on the Max 
Ice feature. Max Ice will remain activated for 24 hours unless 
manually turned off. 

NOTE: The temperature display for the refrigerator and freezer 
compartments will remain at the user’s set points, but the actual 
temperature of the freezer compartment will drop to -5°F (-21°C), 
while the Max Ice feature is enabled. After 24 hours, the freezer 
will return to the previous temperature set point.

The Max Cool feature assists with full grocery loads, temporarily 
warm room temperatures, or during heavy door opening use.   

■

Press OPTIONS, and then press MAX COOL to turn on the 
Max Cool feature. Max Cool will remain activated for 24 hours 
unless manually turned off.

NOTE: The temperature display for the refrigerator compartment 
will remain at the user’s set point, but the actual temperature of 
the Fridge compartment will drop to 34°F (1°C), while the Max 
Cool feature is enabled. After 24 hours, the refrigerator returns to 
the previous temperature set points. 

Sabbath mode is designed for the traveler or for those whose 
religious observances require turning off the lights and ice maker. 
By selecting this feature, the temperature set points remain 
unchanged, the ice maker will be disabled, the interior lights will 
turn off, and the audio tones are muted. For most efficient 
refrigerator operation, it is recommended to exit Sabbath mode 
when it is no longer required.

■

Press the SABBATH touch pad to turn on Sabbath mode. This 
feature will remain on until Sabbath is pressed again. 

NOTE: If the Max Cool or Max Ice feature has been selected 
prior to turning on Sabbath mode, Max Cool and Max Ice will 
be automatically canceled upon entering Sabbath mode.

See “Water Filter Indicator” in the “Water Filtration System” 
section.

REFRIGERATOR too cold
Not set correctly for conditions

REFRIGERATOR Control 1° 
higher

REFRIGERATOR too warm
High use or room very warm

REFRIGERATOR Control 1° 
lower 

FREEZER too cold
Not set correctly for conditions

FREEZER Control 1° higher 

FREEZER too warm/too little 
ice 
High use or heavy ice use

FREEZER Control 1° lower