Inglis Home Appliances 2225407 Manuale Utente

■

The water system needs 

to be filled the first time it is used. Use a sturdy container to 
depress the water dispenser until water begins to flow. 
Dispense and discard 2 to 3 gal. (8 to 12 L) of water. This will 
take approximately 6 to 7 minutes and will help clear air from 
the line. Additional flushing may be required in some 
households. See the “Water Dispenser” section.

■

Be sure the water shutoff valve is 

turned on and the water source is connected to the 
refrigerator. See the “Water Supply Connection" section.

■

Is the water shutoff valve clogged or incorrectly installed? 
See the “Water Supply Connection"section. If clogging or 
installation is not a problem, call for service or contact a 
plumber.

■

If you find or 

suspect a kink in the water line, call for service.

■

The 

filter may be full or incorrectly installed. Depending on your 
model, remove the water filter cartridge (see the "Interior 
Water Filtration System” section). Operate the dispenser. If 
the water flow increases noticeably, your filter is full and 
needs to be replaced.

■

Hold the container under the water dispenser two 

to three seconds after releasing the dispenser lever. Water 
may continue to dispense during this time.

■

The 

water filtration system may have air in the lines, causing water 
to drip. Additional flushing may help clear air from the lines. 
Normal dispenser use should flush air from the lines within 24 
to 72 hours.

■

Allow 24 hours 

for the refrigerator to cool completely.

■

Has a large amount of water been recently dispensed? 
Allow 24 hours for the water to cool completely. 

■

The first glass of 

water may not be cool. Discard the first glass of water.

The warmth is probably due to normal operation of the automatic 
exterior moisture control.

■

This 

prevents cold air movement between the compartments. 
Move objects away from the air vents. See the “Ensuring 
Proper Air Circulation” section for air vent locations.

■

The refrigerator will warm 

when this occurs. Keep the refrigerator cool by getting all 
items out at one time, keeping food organized, and closing 
the door as soon as possible.

■

Adding a large amount of food 

warms the refrigerator. It can take several hours for the 
refrigerator to return to the normal temperature.

■

See the “Using the Control(s)” section.

■

Remove any 

objects from in front of the air vents. See the “Ensuring 
Proper Air Circulation” section for air vent locations.

■

Avoid humidity buildup by 

getting all items out at one time, keeping food organized, and 
closing the door as soon as possible.

■

It is normal for moisture to build up 

inside the refrigerator when the room air is humid.

■

Check that all food is 

securely wrapped. Wipe off damp food containers before 
placing them in the refrigerator.

■

See the “Using the Control(s)” section.

■

It is normal for 

droplets to form after the refrigerator self-defrosts.

■

Clean gaskets and the 

surface that they touch. Rub a thin coat of paraffin wax on the 
gaskets following cleaning.

■

Rearrange 

containers so that they fit more tightly.

■

Push the ice bin in all the way.

■

Put these items into their correct positions. See 

the “Refrigerator Features” section for more information.

■

Clean gaskets and the surface 

that they touch. Rub a thin coat of paraffin wax on the 
gaskets following cleaning.

■

Level the 

refrigerator. See the “Door Closing and Alignment” section.

■

Remove and replace the doors 

according to the “Refrigerator Doors" section, or call a 
qualified service technician.