U-Line U-CO29B-03 Manuale Utente

u-line.com

Location of the unit may make it desirable to mount the door on 
the opposite side of the cabinet. Many doors are reversible. See 
table below.

• The hinge hardware will be removed and reinstalled on the 

opposite side of the cabinet.

• The top hinge hardware will be reinstalled on the bottom of the 

opposite side of the cabinet.

• The bottom hinge hardware will be reinstalled on the top of the 

opposite side of the cabinet.

1. Hold door to keep it from falling.

2. Remove hinge screw pin (1) from top hinge using a Phillips 

screwdriver. 

3. Remove door by tilting forward and lifting door off bottom hinge 

closer inserts.

4. Reinstall hinge screw pin (1) into top hinge using a Phillips 

screwdriver. 

Remove plastic screw plugs (three each, top and bottom) (3) 
from new hinge location. Save for reinstallation later.

Remove existing top hinge (three screws) (2).

1. Install the hinge just removed from the top to the BOTTOM 

opposite side of the cabinet (three screws) (2).

2. Remove the two door closer inserts (4) from the existing 

bottom hinge.

3. Install door closer inserts as shown on the new bottom hinge 

(4).

1. Remove the preexisting bottom hinge (three screws) (2).

1. Install the hinge just removed from the bottom to the TOP 

opposite side of the cabinet (three screws) (2).

1. Install plastic screw plugs (three each, top and bottom) (3) into 

holes where hinge hardware was removed.

U-2175RFB-00

YES

U-CO2175FB-00

YES

U-2175RFS-00

NO

U-CO2175FS-00

NO

U-2175RFS-01

NO

U-CO2175FS-01

NO

U-2175RFW-00

YES

U-CO2175FW-00

YES