FieldServer FS-8704-09 SNMP Manuale Utente
FS-8704-09 SNMP Driver Manual
Page 34 of 39
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com
Appendix C. Driver Error Messages
Message
Description/Action
SNMP:#01 Err. Response report
err=%d
err=%d
A response from the remote device reports an error. The message
is good but inside the message there is a field reporting an error.
Consult the vendor for the meaning of the printed SNMP error
number.
is good but inside the message there is a field reporting an error.
Consult the vendor for the meaning of the printed SNMP error
number.
SNMP:#02a/b Err. Could not
read SNMP response version
read SNMP response version
The driver found an error in the message structure preventing it from
extracting the SNMP version number. See msg #05 for follow up
actions.
extracting the SNMP version number. See msg #05 for follow up
actions.
SNMP:#03a/b
Err.
Version.
Expected=1 Rcvd=%d
This driver only supports SNMP version #1. See msg #05 for follow
up actions
up actions
SNMP:#04a Err. Extract Int
Failed. Index=%d
SNMP:#04b Err. Expected INT.
Found NULL. Index=%d
Failed. Index=%d
SNMP:#04b Err. Expected INT.
Found NULL. Index=%d
The driver is extracting an integer value from the SNMP message
but the field was incorrectly formatted. Formatting can be checked
using Ethreal
but the field was incorrectly formatted. Formatting can be checked
using Ethreal
4
SNMP:#05 Err. Parse Failed.
MD=%s Msg Buffer
MD=%s Msg Buffer
The driver is attempting to process a SNMP message that is not
correctly formatted; contains an error or contains unsupported
SNMP elements. Immediately after the message has been printed
the driver does a hexadecimal dump of the message.
If you see this message rarely and data is being transferred correctly
then ignore it. If it is repeated or affects data transfer then take a log
and call tech Support. This message is usually preceded by a
message which provides a more specific clue as to why the parse
failed.
correctly formatted; contains an error or contains unsupported
SNMP elements. Immediately after the message has been printed
the driver does a hexadecimal dump of the message.
If you see this message rarely and data is being transferred correctly
then ignore it. If it is repeated or affects data transfer then take a log
and call tech Support. This message is usually preceded by a
message which provides a more specific clue as to why the parse
failed.
4
SNMP:#10 FYI. NuDesign MIB
File=%s created. (Tier=%d)
SNMP:#10 FYI. Custom MIB
File=%s created. (Tier=%d)
SNMP:#10 FYI. MIB File=%s
created. (Tier=%d)
File=%s created. (Tier=%d)
SNMP:#10 FYI. Custom MIB
File=%s created. (Tier=%d)
SNMP:#10 FYI. MIB File=%s
created. (Tier=%d)
These messages do not require any corrective action provided that
they report what you expected. They are printed for confirmation
only.
they report what you expected. They are printed for confirmation
only.
SNMP:#11
Err.
Can’t
open
MIBHead.ini. Producing std MIB
file
file
The configuration has told the driver to build a customized MIB file.
This requires that a file called MIBHead.ini is present on the
FieldServer. Refer to the configuration manual and Appendix A.3 for
more information.
This requires that a file called MIBHead.ini is present on the
FieldServer. Refer to the configuration manual and Appendix A.3 for
more information.
SNMP:#12 Err. Bad MD length -
defaulting to 1
defaulting to 1
A MD was found where the length was not specified or specified as
zero. Specify the length setting it to one.
zero. Specify the length setting it to one.
5
SNMP:#13
Err.
Max=255
number
of
TRAP
map
descriptors exceeded
The default maximum number of trap Map Descriptors is 255.
SNMP:#14 Err. SNMP_TRAP
map descriptor must have OID
specified
SNMP:#15 Err. Passive_Client
map descriptor must have OID
specified
map descriptor must have OID
specified
SNMP:#15 Err. Passive_Client
map descriptor must have OID
specified
You must specify the ‘SNMP_OID” parameter on a Map Descriptor
used for a trap. Read Appendix A for more information on Traps
used for a trap. Read Appendix A for more information on Traps
5
SNMP:#16
unknown
SNMP_Read_Method value: %s
The only permitted value for the SNMP_Read_Method is
‘walk’Error! Bookmark not defined.
‘walk’Error! Bookmark not defined.
SNMP:#17 Err. Diagnostic 1
The driver has executed an internal diagnostic. If this message is
printed please call Tech Support.
printed please call Tech Support.
4
Refer to Enote 63 on the Website for more information.
5
Edit the configuration file, downloaded the modified file to the FieldServer and restart the FieldServer for
the changes to take effect.