FieldServer FS-8704-09 SNMP Manuale Utente
FS-8704-09 SNMP Driver Manual
Page 8 of 39
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com
4.3.
Client Side Node Descriptors
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for Node
Up
to
32
alphanumeric
characters
characters
Node_ID*
Identifies Node; needed only if Node Online/Offline
monitoring is used.
monitoring is used.
1-255
Protocol
Specify protocol used
SNMP
Adapter
Specify network adapter
N1, N2
2
IP_Address
IP Address of remote Agent. Refer to Appendix A.1
for more information.
for more information.
Legal 4 byte IP
address on the
same subnet.
address on the
same subnet.
MIB_Style
Controls how MIB file is formatted. Refer to
Appendix A.3 for more info.
Appendix A.3 for more info.
‘Standard’;
‘Custom’;
‘NuDesign’
‘Custom’;
‘NuDesign’
MIB_Style_for_Traps
Controls how traps are reported in MIB file. Refer to
Appendix A.3 for more info.
Appendix A.3 for more info.
Style1;
Style2;
Style3
Do_not_MIB_this_Node
Controls whether a Node’s traps contribute to the
MIB file. Where duplicate traps are sent to more
than one Node, second and subsequent Nodes will
not contribute to the MIB file. Review the example
MIB files and configuration file in Appendix A.3.
0 – Node’s traps contribute to MIB File.
1 – Node’s traps do not contribute to MIB file.
MIB file. Where duplicate traps are sent to more
than one Node, second and subsequent Nodes will
not contribute to the MIB file. Review the example
MIB files and configuration file in Appendix A.3.
0 – Node’s traps contribute to MIB File.
1 – Node’s traps do not contribute to MIB file.
0; 1
SNMP_Read_Method*
If this parameter is set it is possible for the
FieldServer to sequentially read (walk) the SNMP
Server in the same way as the snmpwalk parameter
works on SNMP.
FieldServer to sequentially read (walk) the SNMP
Server in the same way as the snmpwalk parameter
works on SNMP.
Walk, -
Example
// Client Side Nodes
Nodes
Node_Name,
Node_ID,
Protocol,
Adapter,
IP_Address,
SNMP_Read_Method
Agent 1,
1,
SNMP,
N1,
192.168.1.174,
Walk