Toshiba 120 Manuale Utente

If print output is faint, uneven or smeared, follow the steps listed below.

You can select "Draft", "Normal" or "Photo" for the 

print quality in the "Advanced" tab of the printer 

driver setup screen. When "Photo" is selected, you 

can click the "Image Adjustment" button and adjust 

the brightness and contrast in the dialog box that 

appears. Adjust these settings appropriately for 

your print data and try printing again.

Reference:

If the paper is curled, straighten it up and set it in 

the unit again.

Only paper weighing from 56 

J/m

2

 to 80 

J/m

2

 (15 

lbs. to 21 lbs.) can be used in the paper tray. Only 

paper weighing from 52 

J/m

2

 to 128 

J/m

2

 (14 lbs. to 

34.5 lbs.) can be used in the multi-bypass.

When the developer replacement required ( ) 

indicator lights up, the developer should be 

replaced. DEVELOPER REPLACEMENT SHOULD 

ONLY BE DONE BY AN AUTHORIZED TOSHIBA 

SERVICE TECHNICIAN. Contact your service 

center as soon as possible.

When it is near time to replace the toner cartridge, 

the toner cartridge replacement required ( ) 

indicator will light up on the unit operation panel. 

When it is time to replace the cartridge, the 

indicator will blink. Replace the cartridge and try 

printing again.

Reference:

See "TONER CARTRIDGE REPLACEMENT" 

in the Operator’s Manual.

When the maintenance ( ) indicator lights up, 

service by an authorized TOSHIBA service 

technician is required. Contact your service center 

as soon as possible.

If the margins are set outside of the quality 

guaranteed area, smudges or smears may appear 

at the upper and lower edges of the paper.

When selecting the paper settings in the 

application, set the margins from the top, bottom, 

left and right edges of the paper to 4 mm (5/32").