Zanussi ZL 58 W Manuale Utente

3

2

4

Before use 

4

Setting the temperature

4

Fresh food refrigeration 

4

Normal operating sounds

4

Movable shelves

5

Positioning the door shelves

5

6

6

Internal cleaning

6

External cleaning

6

When the appliance is not in use 

6

Changing the light bulb 

7

Defrosting

7

8

9

9

10

11

12

Positioning

12

Rear Spacers

12

13

14

14

1. Disconnect from the electricity supply.

2. Gently lay the fridge on its back with the top held

away from the floor by 5-8 cm (2-3 inches) of
packing;

3. Remove the bottom hinge (1) retaining screws

and remove the foot (2);

4. Slide out the fridge door from pin (G), unscrew

the latter and then refit it on the opposite side;

5. Unscrew the foot on the left side and refit it on the

opposite side;

6. Remove the two screws which mask the holes for

fixing the hinge from the left hand side;

7. Refit the door and the lower hinge (1) and the foot

(2);

8. Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch. Cover
the holes left open with the plugs supplied in the
documentation pack.

After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.

D162/1

Printed on recycled paper