Danby DWC1233BL-SC Manuale Utente

Part Identification

1. Glass Door

2. Control Panel

3. LCD Display

4. Interior Light (

not shown)

5. Wine Racks

6. Door Hinge Cover

7. Adjustable Feet

Location Requirements

• Select a location with a strong, level floor.

• Allow 5 inches of space between the back of the

appliance and any adjacent wall.

• Avoid direct sunlight and heat. Direct sunlight may

affect the acrylic coating, heat sources nearby will
cause higher electricity consumption.

• Do not

use this appliance outdoors:

This

appliance is intended for

household use only. Do

not attempt to operate or store this appliance
outdoors.

• Do not build this appliance into an enclosure: This

appliance is designed for a free-standing
application only and is not intended to be “built-in”.

Before Using your Wine Cooler

• Remove the exterior and interior packing

• Check to be sure the following parts are included:

• 3 Slide-out shelves.

• Before connecting the appliance to the power

source, let it stand upright for approximately 2
hours. This will reduce the possibility of a
malfunction in the cooling system from handling
during transportation.

• Clean the interior surface with lukewarm water

using a soft cloth.

• Place your appliance on a floor that is strong

enough to support the appliance when it is fully
loaded. To level your appliance, adjust the front
legs at the bottom of the appliance.

I N S T A L L A T I O N

ºC/ºF