Danby DBC162BLSST Manuale Utente

Installation Instructions - Door Swing Reversal

1 Bottom hinge (Right) 2 Screws

3 Door axis

4 Screws 5 Extrusion-board of lamp swith 6 Top hinge (Right)
7 Decorative nail 8 Screws 9 Top hinge (Left)

Fig 1A

Fig 1B

Fig 1D

Fig 1C

ˊWhen open the door 90 degree, take out 2 screws from lower door axis (3),

remove the door refer Fig. 1A, then pull out the door and door axis (Fig. 1A).
2

ˊPut the door safety and take out decorative nail (7) from top of door frame,

unscrew 2 screws (4) at bottom and remove the Extrusion-board of lamp switch (5),
then install (5) at top of door frame, please use spare decorative nail to block
the hole at top of door frame. (Fig. 1A/1B)
3

ˊMake out 3 screws (8) from top hinge (right) (6) and remove the right top

hinge. (Fig. 1C)
4

ˊRemove decorative nail (10) from left top of cabinet and install spare top

hinge (Left) (9) at left top of cabinet with 3 screws. (Fig. 1D)
5

ˊAccording above procedure, install spare lower hinge (left) (11) onto left

lower cabinet. (Fig. 1E)
6

ˊThe door revolves 180 degrees, install the door with same way it was removed

and fix it with door alightment.
7

ˊBlock the hole at right top of cabinet with spare decorative nail.

Fig 1E

Bottom hinge (Left)

Decorative nail