Elkay HRC2-10-1D Dépliant

98244C (3/06)

NOTE:  It is important to insure proper ventilation.  Allow a
minimum clearance of 6 inches (152 mm) in front and 3
inches (76mm) in the rear of the unit.  If unit is to be in-
stalled in an enclosure, allow the following clearances
around unit 1 inch (25mm) each side, 3 inches (76mm) in
the rear, 3 inches (76mm) inches above wall.

This chiller has been designed for use with potable water
and includes an o-ring seal on the drain plug.  This fitting
should be replaced if the unit is to be used with more
aggressive fluids.