Samsung C24A650U Manuale Utente
43
Using "Central Station"
2
2 Using "Central Station"
Go to Control Panel
Network and Internet
Network and Sharing Center
Change
adapter settings. Next, right-click on the Central Station monitor’s network device (marked
“LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”) and select Use.
3
Using the network properties menu, check that the IP address mode for the Central Station
monitor’s network device is set to Auto.
Go to Control Panel
Network and Internet
Network and Sharing Center
Change
adapter settings. Next, right-click on the Central Station monitor’s network device (marked
“LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”).
Select Properties
Internet Protocol Version 4 (TCP/IPv4)
Properties.
2.5.2
Static IP
To configure the IP address (private or official) on your PC, someone (mostly a server system) must
distribute and allot an IP address to the PC. An official IP address is allotted by your Internet service
provider, and a private IP address is allotted by your Internet router. You can select whether to configure
the IP address on the PC automatically or manually. The static IP address mode is used to manually enter
an IP address. The static IP address mode is suitable if the IP address for the PC should not be changed
(such as for a file sharing server) and generally is not used, except under such special circumstances.
When using your Central Station monitor’s or notebook PC’s LAN network, ensure you insert a LAN
cable into only one device. Otherwise, a system crash may occur.
→
→
→
→
→
→
→
→