GE JGSP23 Manuale Utente
Assembling The Burners
CAUTION: The electrode of the
spark igniter is exposed and the
mixer bowl may have sharp edges.
When cleaning the burner bowl, be
careful not to snag the electrode of the
spark igniter with a cleaning cloth.
Damage to the igniter could occur. Be
careful not to turn on any cooktop
controls while cleaning burner bowls. A
slight electrical shock might result, which
could cause you to knock over hot
cookware.
1. Place the Burner Head onto the Burner Bowl.
Line the opening of the Burner Head with the
location of the Spark Igniter.
2. Place the Burner Cap onto the Burner Head.
3. Place the grate over the burner assembly and
3. Place the grate over the burner assembly and
burner bowl. The indentations of the bowl
should match the location pins on the bottom
of the grate.
Installation Instructions
F1
F
Cooktop Burners
Burner Grate
Burner Cap
Burner Head
Spark Igniter
Mixer Tube
(Chimney)
(Chimney)
Burner
Bowl
Bowl
Turn the gas supply on and use a liquid leak
detector (soap solution) at all joints and
connections to check for leaks. Do not use an
open flame to look for leaks. Be sure all leaks
are stopped before lighting burners.
10
Check for Leaks
F2
The range and its individual shut-off
valve must be disconnected from the
gas supply piping system during any
pressure testing of the gas supply system
at test pressures of more than 1/2 psig
(pounds per square inch gauge).
The range must be isolated from the gas
The range must be isolated from the gas
supply piping system by closing its
individual shut-off valve during any
pressure testing of the gas supply system
at test pressures equal to or less than 1/2"
psig.
The maximum allowable pressure for the
regulator is 14" W.C. The minimum pressure
needed to check the regulator setting is 7" W.C.
for natural gas.
Pressure Test Information
F3
About the Cooktop Burners
F4
Turn each burner on. Flames should be blue in
color with no trace of yellow. The burner flames
should not flutter or blow away from the burner.
The inner cone of the flame should be between
1/2" and 3/4" long.
1/2" and 3/4" long.
Foreign particles in the gas line may cause an
orange flame at first, but this will soon disappear.
Cooktop
Burner
Burner
1/2" to 3/4"