GE JGSP23 Manuale Utente

Pagina di 38
Preparing the Counter
Installation Instructions
B
B1
WARNING:  The Filler Strip supplied or
optional backguard  must be used.
With any installation do not let the
countertop or other combustible material fill the
space between the back edge of the cooktop and
back of the required cutout.
Your range is designed to be installed in a 30"
wide opening; the cutout depth will vary with the
type countertop you have. There are three
basic recommended installations:
1. Standard 25" countertop without post-formed
backsplash.
2. Island.
3. Standard countertop with post-formed
backsplash.
After deciding the countertop type you have,
choose the best installation to meet your needs.
With any installation, mark the cutout on the
counter.
Dimensions given in the following references are
measured from the front of the counter, not from
the cabinet face. To minimize chipping, you may
apply masking tape. For best appearance, it is
important that the cut be smooth and straight.
Side Trim Extention Kit
If there is a small gap between the sides of the
range and the cabinets (up to 1/4" each side) you
can order a side trim extension kit through any
Service Center.
Order Pub. No. 8078690/3-A040.
Filler Strips or Backguard
B2
For Standard 25" Counter Without
Post-Formed Backsplash
(Top view of counter cutout)
25"
30"
Rear Wall
25"
35 7/8" MIN.
38" MAX.
Furring
Strip
Range to Wall with Filler Strip
25"
Rear Vented
Filler Strip
Furring
Strip
1/2" MAX
From Front of 
Countertop to Wall
5
B3